Tips For Replacing a Window Handle
It is easy to replace your window handle in the at-home comforts of your home. Follow these guidelines to ensure a smooth and beautiful finish.
Start by removing the screws to expose the screws inside your uPVC window handle. Then, measure the length of the spindle to ensure that you receive the correct size replacement.
1. Measure the Spindle Length
It's important that you have the right size spindle when replacing a window handle. This is because it will affect how tight or loose the handle is, and whether it's able to lock properly inside the frame of the window. The spindle is the steel shaft that connects the handle and the lock inside the window frame. The spindle can be found in the standard cross-section of 8mm for industry or the older versions that measure 9mm. Modern industry standards are 8mm, but it wasn't always this way. It is crucial to confirm the measurements before purchasing the handle you want to purchase.
Take the handle off. This is easily done by turning the handle into the open position, and unwinding two screws that secure the handle (which are usually hidden behind plastic caps which are required to be removed). After removal, you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements you need to buy a replacement.
There are many options when you are looking to pick the perfect window handle. From sleek chrome that will fit into modern homes to traditional burnished bronze that looks great in restored Georgian rooms, or the more quaint Tudor Cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that suits your home.
Espag handles are typically installed to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a variety of sizes, starting at 58mm to 62mm. Window handles from Cadenza come in distinct dimensions due to their angled blade which operates the multi-point lock mechanism within the window.
Another aspect to consider when selecting a new window handle is knowing what hand you require to use, which is defined by what hand you use to open the door. Inline espag window handles are not hand-operated and can be used on right or left handed windows. Cranked window handles are handed and are only used on windows that open in one direction.
2. Remove the Handle
A window handle that falls out can be frustrating, regardless of whether the handle has been damaged or worn out. upvc replacement door handles is, you can replace the uPVC handle by yourself. All you require is a few basic tools and some time to complete the job.
First, you must open the window and make sure it's not locked. Then, remove the screw caps that hold the handle in place. Once the screw caps have been removed, you will be able remove the handle.
The handle is attached to a spindle inside the window frame. The handle is fixed with screws or pins according to the type of handle. The most commonly used types of handles are inline Espagnolette handles and the cockspur handles. Both kinds of handles can be found on casement windows including aluminium ones. The handles can be locked with a key in order to stop unauthorised access from outside. You can also lock the handles by turning them clockwise.
To take the handle off, you'll need a screwdriver with a flat blade to loosen the clip that holds the handle in place. Once the clip is released, the handle will slide off the spindle. Once the old handle is removed, you'll have to determine the length of the spindle in order to ensure that your new handle is compatible with this measurement.
Once you have determined the correct size for the handle, screw it into place. It is important to make sure that the new handle is firmly secured and that it is turning the correct way (clockwise for open, or counterclockwise for closed). It is also crucial to make sure that it has not been installed upside down.
Then, you must replace the screw cap caps. After you've completed this step, you are able to test your handle to make sure it's functioning properly. You should also test the locking mechanism by moving the handle to the locked position, and then returning it to the locked position.
3. Take the Screws off
A uPVC window handle is an essential element of any home and is often the first thing to exhibit signs of wear and wear and tear or damage. This could be due to natural factors or through regular use and sometimes even intentional damage caused by criminals who want to open a closed window and gain access to your property. However, a simple repair will solve the issue and stop the issue from happening again.
UPVC handles can also be difficult to remove if the locking mechanisms are not working properly. Most of the time, the issue can be resolved by replacing the multipoint lock, rather than the entire handle and it's definitely worth a look because it could save you money.
After removing the old handle, you will need to take off any screws that held it in place. They are usually located on the inside face of the handle base. You may require an screwdriver to do this, and it's important that you don't over tighten, as this could cause the handle to become loose.
You will then need to find the fixing pins or screws that hold the new handle in place. They're usually on the inside of the handle base. You will need a screwdriver to remove them. After they've been removed, you'll have to replace the screw caps if you wish to do so, and then test the new handle to make sure it's functioning properly.
Install the handle by adjusting the spindle with the cutout in the window mechanism. Then, screw it in. Make sure that the handle is in the open position and that any screws are tightly fixed before replacing the screw covers if you wished to do so. It's done! You can enjoy the newly installed window handle. This will hopefully help you avoid costly door and window replacements in the future. If you'd like to get more assistance in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Fit the New Handle
Whether you're replacing a broken handle or simply updating it the procedure is simple and can be completed in just a few steps. Identifying the type of window handle, measuring its spindle length, and knowing the tools you'll require to complete the task are key. Safety is always the first priority when working with windows and tools. Take your time to follow the steps and make sure that you have the right handle to use.
The first step is to locate the screws that hold your existing window handle and take them out, while maintaining a safe hold on the handle to prevent it from crashing and causing injury. After the screws have been removed they can be repositioned in a safe spot to be replaced later.
After removing the old handle, you are now able to install your new one. The handle should be a perfect fit for it to function properly and hold the window in its closed position. Next you need to slide the square metal bar on the handle into the hole in the window mechanism.
Now that the new handle is in place, the final step is to replace the screw caps and test it to make sure it works. If you are not satisfied with the results, or the window doesn't open and close properly, call our experts for assistance.
The majority of homes in the UK have uPVC windows and as so, a large number of them will need to be replaced due to damage or wear. The procedure is simple and can be done by anyone with a little experience in DIY. It is important that the handle you select is in line with the style and size of the window. Contact us if are unsure about the type of handle you require. They will be able guide you through all the choices.